Konica Minolta bizhub C650 - Manual (Page 27)

Transfer belt unit, Transfer roller unit replacement instructions
3
7. Slide the image transfer entrance
guide [1] towards the back of the
main body and remove it.
NOTE
• When removing the transfer belt
unit, the image transfer entrance
guide [1] may be deformed.
In order to avoid this, be sure to
remove the image transfer entrance
guide before the removal of the
transfer belt unit.
8. Remove two screws [1] and pull the
two transfer belt locks [2] towards the
right of the main body to unlock the
transfer belt.
NOTE
• Pull the transfer belt locks towards
the right of the main body until they
stops so that the lock is completely
released.
9. Open the tray 1 [1].
[1]
A00JF2C559DA
[2]
[1] [2]
[1]
A00JF2C049DA
A00JF2C545DA
[1]