Konica Minolta bizhub C650 - Manual (Page 29)

Transfer belt unit, Transfer roller unit replacement instructions
5
NOTE
• When removing/reinstalling the
transfer belt unit, be sure not to
allow the contact [1] to hit the screw
[2] of the transfer belt unit lock.
13. Change the way of holding the trans-
fer belt unit [1] as shown in the pic-
ture and remove it.
1.2 Reinstallation procedure
NOTE
• Do not touch the surface of the new transfer belt unit.
1. Holding the new transfer belt unit [1]
as shown in the picture, insert and
slide it along the rail.
NOTE
• Insert the transfer belt unit with
care not to allow its docking gear to
be damaged by hitting it against the
rail or associated part.
A00JF2C609DA
[1]
[2]
A00JF2C053DA
[1]
A00JF2C560DA
[1]