Konica Minolta bizhub C650 - Manual (Page 26)

Transfer belt unit, Transfer roller unit replacement instructions
2
4. Open the multi bypass tray, and open
the upper right door [1].
5. Remove the screw [1], and remove
the wire [2] for the upper right door
stopper.
6. Loosen the shoulder screw [1] and
slide the image transfer entrance
guide stopper [2] towards the back of
the main body.
A00JF2C542DA
[1]
CAUTION
• Do not remove any screws other than
the specified ones.
[1]
A00JF2C046DA
CAUTION
• Do not remove any screws other than
the specified ones.
[2]
[1]
A00JF2C581DA