Polycom 6000 - Manual (Page 14)

Administrator Guide for Polycom QDX 6000 System
2 - 2
To configure LAN properties:
1. Go to System > Admin Settings > LAN Properties.
2. Configure these settings on the LAN Properties screen:
Points to Note about IPv6-only Network Limitations:
• Do not configure a Polycom Global Directory Server address.
• Disable IP H.323 in the Call Preference menu.
• The Polycom Global Management System™, Polycom ReadiManager®
SE200, and Polycom CMA™ system will not be able to connect to the Polycom
QDX 6000 system.
Setting Description
IP Address (IPv4) Specifies how the system obtains an IP address.
• Obtain IP address automatically — Select if the
system gets an IP address from the DHCP server on the
LAN.
• Enter IP address manually — Select if the IP address
will not be assigned automatically.
Changing this setting causes the system to restart.
IP Address If the system obtains its IP address automatically, this area
displays the IP address currently assigned to the system.
If you selected Enter IP Address Manually, enter the IP
address here. Changing the IP address causes the system
to restart.
Subnet Mask Displays the subnet mask currently assigned to the system.
If the system does not automatically obtain a subnet mask,
enter one here.
Changing this setting causes the system to restart.
Default Gateway
(IPv4) Displays the gateway currently assigned to the system.
If the system does not automatically obtain a gateway IP
address, enter one here.
Changing this setting causes the system to restart.