Polycom 6000 - Manual (Page 61)

Calling and Answering
6 - 5
To create a localized directory entry using the Polycom QDX 6000 web interface:
1. On a computer, open a web browser.
2. In the browser address line, enter the system’s IP address, for example,
http://10.11.12.13
, to go to the Polycom QDX 6000 web interface.
3. Go to Place a Call > Directory.
Edit an entry to enter a localized directory entry name in the Localized Name
field, and specify the language for the localized directory entry.
Configuring the Global Directory
The global directory provides a list of other systems that are registered with
the Global Directory Server and available for calls. The other systems appear
in the directory, allowing users to place calls to other users by selecting their
names.
You can configure the system to use one of the following directory servers.
Directory
Servers
Supported
Authentication
Protocols
Global
Directory
Groups
Entry Calling Information
Polycom GDS Proprietary Not Supported May include: H.323 IP
address (raw IP address,
DNS name, or H.323
extension)
LDAP with
H.350 or
Active
Directory Any of the
following:
• NTLM
• Basic
• Anonymous
Not Supported May include:
• H.323 IP address (raw
IP address, DNS
name, H.323 dialed
digits, H.323 ID, or
H.323 extension)
• SIP address (SIP URI)
LDAP by a
Polycom CMA
system NTLM only Pre-defined
groups from
the LDAP
directory are
shown in
Polycom QDX
6000 system’s
directory May include: H.323 dialed
digits, H.323 ID, or H.323
extension