Polycom 6000 - Manual (Page 62)

Administrator Guide for Polycom QDX 6000 System
6 - 6
To choose a directory server:
1. Go to System > Admin Settings > Global Services > Directory Servers.
2. Enable LDAP or Polycom GDS.
3. Select Edit to edit the connection information for the desired server.
To configure the Polycom GDS settings:
1. Go to System > Admin Settings > Global Services > Directory Servers >
Edit.
2. Configure these settings on the Global Directory Servers screen:
To configure the LDAP settings:
1. Go to System > Admin Settings > Global Services > Directory Servers >
Edit.
2. Configure these settings on the LDAP screen.
Setting Description
Global Directory
(GDS) Specifies the IP address or DNS address of the Global
Directory Server. You can enter up to five addresses.
Password Lets you enter the global directory password, if there is one.
Register Registers this system with the Global Directory Server.
Display Global
Addresses Displays other registered systems in the global directory.
Display Name in
Global Directory Specifies whether to display the system’s name in the global
directories of other registered systems.
Save Global
Directory to
System Copies the global directory to this local system. When this
setting is disabled, the system can display no more than 1,000
global directory entries. When this setting is enabled, the
system can display up to 2,500 global directory entries.
Group Name Specifies the group name used for Polycom GDS directory
entries in the local directory. The default name for the Polycom
GDS group is Polycom GDS.