Polycom 6000 - Manual (Page 38)

Administrator Guide for Polycom QDX 6000 System
3 - 10
6. Select and configure these settingss:
7. Select and configure these settings:
Name Specifies a name and icon for the VCR or DVD player.
Video Quality Specifies Motion or Sharpness for the video input.
• Motion — This setting is for showing people or other
video with motion.
• Sharpness — The picture will be sharp and clear, but
moderate to heavy motion at low call rates can cause
some frames to be dropped. Sharpness is available in
point-to-point H.263 and H.264 calls only.
Setting Description
Setting Description
Camera 5 The fifth video source (VGA IN).
Name Specifies a name and icon for the computer or video source.
Video Quality Specifies Motion or Sharpness for the video input.
• Motion — This setting is for showing people or other
video with motion.
• Sharpness — The picture will be sharp and clear, but
motion will not be smooth. Choose this setting for
document cameras. Sharpness is available in
point-to-point H.263 calls only.
Setting Description
Far Control of Near
Camera Specifies whether the far site can pan, tilt, or zoom the
near-site camera. When this option is selected, a user at
the far site can control the framing and angle of the camera
for the best view of the near site.
Backlight
Compensation Specifies whether to have the camera automatically adjust
for a bright background. Backlight compensation is best
used in situations where the subject appears darker than
the background.
Primary Camera Specifies which camera is the main camera. The primary
camera is active when the Polycom QDX 6000 system
powers up. Its source is automatically set to People.
Camera Pan
Direction Specifies the direction the camera moves when using the
arrow buttons on the remote control.