Polycom 6000 - Manual (Page 26)

Administrator Guide for Polycom QDX 6000 System
2 - 14
4. Select to go to the Preferred Speeds screens and configure these
settings:
5. Select to go to the Call Speeds screen and specify the call speeds to
make available to users.
Configuring Dialing Order Settings
If the call type on the home screen is set to a specific call type, the system does
not attempt to place the call using a different call type, even if other types are
listed in Video Dialing Order.
Setting Description
Preferred Dialing
Method Specifies the preferred method for dialing various call types. If
set to Auto, calls use the configured Dialing Order. If set to
Manual, the system prompts the user to select the call type
from a list when placing a call.
Video Dialing
Order Specifies how the system places video calls to directory
entries that have more than one type of number. It also
specifies how the system places video calls from the Place a
Call screen when the call type selection is either unavailable
or set to Auto. If a call attempt does not connect, the system
tries to place the call using the next call type in the list.
This setting is available only when Preferred Dialing Method
is set to Auto.
For more information, refer to Configuring Dialing Order
Settings on page 2-14 .
Setting Description
Preferred Speed
for Placing Calls Determines the speeds that will be used for calls from this
system when:
• The Call Quality selection is either unavailable or set to
Auto on the Place a Call screen
• The call is placed from the directory
If the far-site system does not support the selected speed, the
system automatically negotiates a lower speed.
Maximum Speed
for Receiving
Calls Allows you to restrict the bandwidth used when receiving
calls.
If the far site attempts to call the system at a higher speed
than selected here, the call is re-negotiated at the speed
specified in this field.