6encoder/feedback system – Lenze 8400 TopLine User Manual
Page 354
6
Encoder/feedback system
6.4
Frequency HTL encoder (DI1/DI2, DI6/DI7)
354
Lenze · 8400 TopLine · Reference manual · DMS 6.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
General procedure
(if the encoder is connected to the digital inputs DI1 and DI2)
1. Define the function of the digital inputs DI1 and DI2 in
.
2. Set the encoder increments in
3. Select "1: Encoder signal FreqIn12" in
4. Adapt the filter time of the speed measurement in
5. In the case of encoders with a very low resolution (number of increments < 120 increments):
Change the encoder evaluation procedure in
if necessary.
Related topics:
Using DI1(6) and DI2(7) as frequency inputs