Defibtech DDU-2450 Series User Manual - Manual (Page 43)

To enter: Navigate to Upgrade AED:
AED Main Menu Ú AED maintenance Ú Upgrade AED
What it does: If an upgrade data card is present, the unit will start performing the upgrade process.
Follow any prompts and instructions that the upgrade application provides.
WARNING
Do not turn off the unit or remove the battery
pack or data card until the operation is complete.
Note: If the DDC card is not inserted, the unit will speak and display “Data Card Missing.”
(Refer to the “
Installing The Defibtech Data Card (DDC card) ” section in Chapter 3 of this manual.)
Press any softkey button to acknowledge the message and then install a Defibtech Data Card (DDC card).
To exit: When the unit finishes performing the AED upgrade, follow the displayed and spoken
instructions.

Transfer Data To Card
Transfer data to card will initiate a data transfer from the DDU-2000 Series AED to a Defibtech Data
Card (DDC card) inserted in the device. Internal event data and device history is written to the DDC card.
Before you begin: Be sure the unit is in Maintenance Mode. Be sure a DDC Card is installed in
the device. (Refer to the “
Installing The Defibtech Data Card (DDC card) ” section in Chapter 3 of this
manual.)
To enter: Navigate to Transfer data to card:
AED Main Menu Ú AED maintenance Ú Transfer data to card
What it does: The unit begins transferring rescue data to the card:
The unit says: “Transferring data to data card”
The unit displays: Transferring Data
The unit will finish transferring data to the data card and will speak and display:
“data transfer complete.”
WARNING
Do not turn off the unit or remove the battery
pack or data card until the operation is complete.
Note: If a data card is not inserted, the unit will speak and display “Data Card Missing.”
(Refer to the “
Installing The Defibtech Data Card (DDC card) ” section in Chapter 3 of this manual.)
To exit: When the unit finishes transferring the data to the data card, it will automatically return to the
AED Maintenance menu screen.

Format Data Card
Format data card is a maintenance tool used to repair corrupted cards. It is unnecessary to perform
this step on cards purchased with your DDU-2000 Series AED.
WARNING
This step will erase all data on the data card!
Before you begin: Be sure the unit is in Maintenance Mode. Be sure a Defibtech Data Card (DDC
card) is currently installed in the device. (Refer to the “
Installing The Defibtech Data Card (DDC card) ”
section in Chapter 3 of this manual.)
8. Maintenance Mode
43
DAC-E2510EN-BB