3a. charge air cooler installation, cont’d – Vortech 2005-2009 Ford 4.6L 3V Mustang GT Air-Air Cooler User Manual
Page 17
Advertising
P/N: 8N020-160
© 2008 Vortech Engineering
All Rights Reserved, Intl. Copr. Secured.
29DEC08v1.0(8N020-160v1.0)
9
Fig. 3A-i
Fig. 3A-j
Fig. 3A-k
13mm HeAded BoltS
nylon PuSH PinS
Fig. 3A-l
SPACeRS
PRoVided
3A. CHARGE AIR COOLER INSTALLATION, cont’d
15. Replace the bolts previously removed with
the four 8mm-1.25" x 35mm long bolts and
washers provided.
16. Install the four 2A017-036 spacers (two
each side) to the bolts. (See Fig. 3A-l.)
14. Remove four inner bolts of eight 13mm
headed bolts retaining the metal bumper
support. (See Fig. 3A-k.)
13. Remove four nylon push pins from the
styrofoam bumper support and set the
support and the pins aside to be rein-
stalled. (See Fig. 3A-j.)
17. Replace the styrofoam bumper support
using the factory retainers.
Advertising