Vortech 2005-2009 Ford 4.6L 3V Mustang GT Air-Air Cooler - Manual (Page 5)

P/N: 8N020-160
© 2008 Vortech Engineering
All Rights Reserved, Intl. Copr. Secured.
29DEC08v1.0(8N020-160v1.0)
v
VORTECH CHARGE COOLER
Installation Instructions
2005-2009 Ford 4.6 Mustang GT (3-Valve)
Before beginning this installation,
please read through this entire instruction booklet
This Vortech Air/Air Charge Cooler system was designed as a street/strip oriented
charge cooler, specifically for use on 2005-2009 Ford 4.6 Mustang vehicles equipped
with a Vortech supercharger.
As with any power enhancing product, this system is intended for use on healthy, well-
maintained engines. Vortech is not responsible for engine damage. Installation on new
vehicles will not harm or adversely affect the break-in period so long as factory break-in
procedures are followed.
TOOL & SUPPLY REQUIREMENTS:
• Open End Wrenches: SAE and Metric
• Allen Wrenches: SAE
• Flat #2 Screwdriver
• Phillips #2 Screwdriver
• Wire Cutters, Strippers and Crimpers
• Tape Measure
• Pipe Tape (Teflon)
• Adjustable Wrench
• 7/8" Hole Saw
• Tap - 5/16-18
• 1/2" Drive Ratchet
• 3/8" Drive and Socket Set: SAE and Metric
• 9/16" Box end Ratchet Wrench (highly recommended)