Vortech 2005-2009 Ford 4.6L 3V Mustang GT Air-Air Cooler User Manual
Page 19
P/N: 8N020-160
© 2008 Vortech Engineering
All Rights Reserved, Intl. Copr. Secured.
29DEC08v1.0(8N020-160v1.0)
11
Fig. 3B-c
Fig. 3B-d
SHoRt endS oF 90°
elBoWS PRoVided
3.
Using a 3" x 3" bump sleeve and two #48
hose clamps, loosely attach tube “A” to
the supercharger discharge.
4.
Attach tube “B” using a second 3" x 3"
bump sleeve and the provided #48 hose
clamps to the open end of tube “A”.
2.
Loosely install the short ends of the two
90° rubber elbows onto each end of the
charge cooler using the supplied #48
hose clamps. (See Fig. 3B-c.)
FittinG RotAted toWARd
FRont oF VeHiCle
3B. CHARGE AIR COOLER CORE INSTALLATION
(2005-2006 Models Only 2007-2009 Model Years Skip to Section 3E)
NOTE: The by-pass port should be facing the
driver’s side
NOTE: For better duct clearance, rotate the
power steering return fitting so that it
points to the front of the vehicle. Use care
not to damage the fitting or hose. If nec-
essary, rotate the power steering line from
the rack to the radiator closer to the
frame. (See Fig. 3B-d.)