Vortech 2005-2009 Ford 4.6L 3V Mustang GT Air-Air Cooler User Manual
Page 20
P/N: 8N020-160
© 2008 Vortech Engineering
All Rights Reserved, Intl. Copr. Secured.
29DEC08v1.0(8N020-160v1.0)
12
Fig. 3B-e | Driver’s side
Fig. 3B-f
tuBe “C”
uPPeR
Hole
loWeR Hole tAPPed
WitH BRACKet inStAlled
tuBe “d”
3B. CHARGE AIR COOLER CORE INSTALLATION, cont’d
(2005-2006 Models Only)
5.
Install the provided 3" x 3" sleeve and
#48 hose clamps onto the open end of
tube “B”.
6.
Using a 5/16-18 tap, tap the lower hole on
the driver’s and passenger’s side core
support. Locate the tube support brack-
ets, 5/16-18 x 1/2" screws and washers.
Loosely attach the tube support brackets
to the core support. (See Fig. 3B-e,
3B-g.)
7.
Install tube “C” between the 90° rubber
elbow and the 3" x 3" sleeve previously
installed on tube “B”. Attach tube “C” to its
support bracket using the #44 hose
clamp. Tighten the clamp and bracket.
Secure all hose connections to this point
using the #48 hose clamps provided
adjusting for best fit and clearance.
8.
Install the short end of tube “D” into the
open end of the passenger’s side 90° rub-
ber elbow previously install. (See Fig.
3B-f.)