Vortech 2005-2009 Ford 4.6L 3V Mustang GT Air-Air Cooler - Manual (Page 40)

P/N: 8N020-160
© 2008 Vortech Engineering
All Rights Reserved, Intl. Copr. Secured.
29DEC08v1.0(8N020-160v1.0)
32
Fig. 3I-j
12. Route the overflow hose across the radia-
tor and under the radiator retaining brack-
et to the 1/4"NPT x 3/8" hose barb fitting
in the coolant reservoir securing with a
clamp. (See Fig. 3I-j.)
13. Check to see that all hose connections
are secure.
14. Refill the coolant system using the factory
coolant (if in good condition). Use the fac-
tory radiator cap saved during a previous
step.
15. Once the cooling system is filled and all
trapped air expelled, install the 1/8"NPT
plug provided in the previously installed
cross-over tube. Thread sealant should
be used.
16. Reinstall the front bumper assembly
including the foam inner bumper, all plas-
tic splash panels and light connections in
the reverse order removed.
tRiM FAn SHRoud
AS needed FoR
HoSe CleARAnCe
FACtoRy
CoolAnt HoSe
3I. ENGINE COOLANT RESERVOIR INSTALLATION
(2005-2006 Models Only), cont’d