Vortech 2005-2009 Ford 4.6L 3V Mustang GT Air-Air Cooler - Manual (Page 24)

P/N: 8N020-160
© 2008 Vortech Engineering
All Rights Reserved, Intl. Copr. Secured.
29DEC08v1.0(8N020-160v1.0)
16
Fig. 3D-c
VACuuM tee
VACuuM HoSe
5. Attach a length of 5/32" vacuum hose to
bypass valve #2 and route to the vacuum
port of the fuel rail sensor.
6. Cut a section of the factory hose and
install the vacuum TEE that is provided.
(See Fig. 3D-c.)
7. Attach the vacuum hose from the bypass
valve to the TEE.
8. Attach a length of 5/32" vacuum hose to
the previously installed bypass valve #1.
Connect the open end to the previously
installed vacuum line running to the fuel
rail from bypass #2 using the TEE provid-
ed. (See Fig. 3D-d.)
3D. COMPRESSOR BYPASS VALVE #2 ASSEMBLY INSTALLATION,
cont’d (2005-2006 Models Only)