Vortech 2005-2009 Ford 4.6L 3V Mustang GT Air-Air Cooler - Manual (Page 46)

P/N: 8N020-160
© 2008 Vortech Engineering
All Rights Reserved, Intl. Copr. Secured.
29DEC08v1.0(8N020-160v1.0)
38
4. AIR INLET ASSEMBLY
A. Remove two of the 3/8-16 x 1" bolts
securing the supercharger in place. Install
the air inlet support bracket and secure
with the 3/8" bolts removed from the
supercharger mounting plate. (See Fig.
4-a.)
B. Attach the 4.0 x 3.5 reducer sleeve to the
inlet duct. Secure the sleeves with the
clamps provided. (See Fig. 4-c.)
C. Using a 7/8" hole saw, drill the secondary
by-pass provision. Be careful not to dam-
age the plastic threads.
D. Apply a small amount of pipe sealant to
the supplied 3/4"NPT to 1" straight barb
fitting. Install the fitting in the previously
drilled hole. (See Fig. 4-b.)
E. Attach the open end of the previoulsy
installed 1" x 90° hose to the 1" straight
barb fitting and secure with a #16 hose
clamp provided.
Fig. 4-a
Fig. 4-c
Fig. 4-b
3/4"nPt x 1" x 90°
BARBed FittinG
3/4"nPt
to 1" BARB
1/4"nPt x 3/8" x 90°
HoSe BARBed FittinG