Vortech 2005-2009 Ford 4.6L 3V Mustang GT Air-Air Cooler - Manual (Page 34)

P/N: 8N020-160
© 2008 Vortech Engineering
All Rights Reserved, Intl. Copr. Secured.
29DEC08v1.0(8N020-160v1.0)
26
Fig. 3H-c
2. Detach the wiring harness from the retain-
ing clips and move the harness to the
shock tower. Secure the harness to the
A/C line with wire ties. (See Fig. 3H-b.)
3. Remove the small clip retaining the small
wiring harness to the shock tower. (See
Fig. 3H-b.)
4. Attach the small harness to the large har-
ness with wire ties.
5. To gain clearance for the coolant reservoir
the A/C line will need to be bent slightly
towards the passenger’s side fender.
(See Fig. 3H-b.)
6. Remove the 10mm headed screw retain-
ing the ground strap to the bracket on the
strut tower. (See Fig. 3H-c.)
Fig. 3H-b
1. On the passenger’s side of the engine,
attached to the valve cover, is a large
wire harness. The harness will have to be
relocated to gain clearance for the radia-
tor overflow reservoir. (See Fig. 3H-a.)
Fig. 3H-a
SeCuRe HARneSS
WitH WiRe-tieS
Bent A/C line
3H. WIRING HARNESS RELOCATION