Brother QL-810W Ultra-Fast Label Printer with Wireless Networking - Manual (Page 176)

Maintenance
166
16
c Remove the DK Roll.
Note
Be sure to remove the DK Roll before cleaning the roller. The roller cleaning function will not operate
correctly if the DK Roll is not removed.
d Remove part (B) of the Cleaning Sheet.
Insert edge (A) of the Cleaning Sheet into the printing unit.
Note
The printed side of the Cleaning Sheet should be facing upwards.
e Close the DK Roll Compartment Cover and turn on the Label Printer.
f Press the Feed ( ) Button (QL-810W) or the Cutter ( ) Button (QL-820NWB) for more than one
second.
The Cleaning Sheet is ejected.
The adhesive side of the Cleaning Sheet removes any stains or dust on the roller.
Note
• If the Cleaning Sheet is not ejected, press and hold the Feed ( ) Button (QL-810W) or the Cutter ( )
Button (QL-820NWB) until the Cleaning Sheet is ejected.
• Dispose of the Cleaning Sheet after use.