Brother QL-810W Ultra-Fast Label Printer with Wireless Networking - Manual (Page 30)

Setting Up the Label Printer
20
1
Note
• Some settings may differ depending on the firmware (printer software).
• If you want to reset the settings, use [
Device settings ] in the Printer Setting Tool to return all settings to
their factory defaults. For more information, see Menu Bar on page 53.
Feed Feed Start Determine when the label feed
starts. These modes may vary
depending on the DK Roll used.
Die-cut Feed
Setting Current Page Label feed starts on the current page
when the die-cut black mark is
detected on the reverse side. If a
die-cut black mark is undetected on
the current page, this mode feeds to
the next page and detection begins
from there.
Next Page This mode always feeds to the next
page and detection begins from
there.
Remote
Update Remote
Update? Start
Back Available only when the Label
Printer is connected to the FTP
Server and when the templates,
databases, and other files need to
be updated. Press [
Start ] to begin
the remote update. After the update
is completed, the Label Printer
automatically returns to the main
screen.
Menu Title Sub title Settings Description