Brother QL-810W Ultra-Fast Label Printer with Wireless Networking - Manual (Page 19)

Setting Up the Label Printer
9
1
CAUTION
• Remove the battery if you do not intend to use the Label Printer for an extended period of time.
• Dispose of the battery at an appropriate collection point, not in the general waste stream. Be sure to
observe all applicable federal, state, and local regulations.
• When storing or discarding a battery, wrap it with cellophane tape to prevent it from short-circuiting.
(see illustration)
1 Cellophane tape
2 Coin Cell battery
• We recommend replacing the battery every two years.
• If the clock resets while you are powering the Label Printer using the AC Power Cord, it is time to
replace the battery. We recommend using a battery from Hitachi, Maxell, or FDK.
1
2