Hardware installation, Vivotek – Vivotek FE9380-HV 5MP Outdoor Network Fisheye Dome Camera with Night Vision User Manual

Page 12

Advertising
background image

VIVOTEK

12 - User's Manual

Please avoid using an Ethernet cable with a large relief boot. You may try to remove the

relief boot. If not possible, use a round cable without the relief boot.

Hardware Installation

1. Jot down the MAC address of the camera for later reference. This is especially important for

an installation consisting of many cameras.

Network Camera

Model No: XXXXXX
MAC: 0002D14BAD55

Pat. 6,930,709

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference

that may cause undesired operation.

Made in Taiwan

2. Remove the dome cover by loosening the T10 anti-tamper screws.

Advertising