Vivotek FE9380-HV 5MP Outdoor Network Fisheye Dome Camera with Night Vision - Manual (Page 92)

VIVOTEK
92 - User's Manual
► If the default ports are already used by other devices connected to the same router, the Network
Camera will select other ports for the Network Camera.
► If UPnP TM is not supported by your router, you will see the following message:
Error: Router does not support UPnP port forwarding.
► Below are steps to enable the UPnP TM user interface on your computer:
Note that you must log on to the computer as a system administrator to install the UPnP TM
components.
1. Go to Start, click Control Panel , then click Add or Remove Programs .
2. In the Add or Remove Programs dialog box, click Add/Remove Windows Components .
3. In the Windows Components Wizard dialog box, select Networking Services and click Details .
NOTE: