Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 116)

Changing the settings
116
En
[Brightness] setting
The default setting is shown with *.
 Display
Setting value: 1, 2* to 4
Adjust the brightness of the display. The larger the setting value is, the
brighter the display becomes.
 Buttons Full Lit
Setting value: 1 to 4*, 5
Set the brightness of the buttons. The larger the setting value is, the
brighter the buttons become.
 Pads Full Lit
Setting value: 1 to 3*, 4
Set the brightness of the 16-pads when the 16-pads are fully lit. The
larger the setting value is, the brighter the pads become.
 Pads Dim Lit
Setting value: 1 to 3*, 4
Set the brightness of the 16-pads when the 16-pads are dimly lit. The
larger the setting value is, the brighter the pads become.