Auto power off function, Before starting – Pioneer Toraiz SQUID - Creative Multitrack Sequencer User Manual
Page 7
Before starting
7
En
Auto power off function
This unit comes with an auto power off function, which is enabled as
the default setting. The power turns off automatically when there is no
signal input, output or operation for approximately 4 hours.
To turn on the power once the unit has turned off automatically, press
the
[
]
button on the rear panel to release it to the off position (
), and
then press in the
[
]
button again (
).
To disable the auto power off function, press the
[GLOBAL]
button to
display the GLOBAL menu. Then, turn the rotary selector to switch the
[Auto Power Off]
setting to
[Disable]
.
Notes
•
Unsaved data will be lost if the unit is powered off automatically. Be
sure to save important data such as edited project data.
•
The auto power off function may not turn off the unit in certain modes
of operation. Therefore, always be sure to turn off the power
manually after use.