Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 43)

Step edit section
43
En
Using Pad Sequence Start to play a sequence
The Pad Sequence Start function can be used to play a sequence
when the pad is tapped.
1 Press the [SCALE] button.
The button lights up in red and the 16-pads switches to Scale mode.
2 Hold down the [SHIFT] button and tap any pad.
• While a sequence is stopped, the sequence is played from the beginning
when a pad is tapped.
• While a sequence is paused, the sequence is played from where it is paused
when a pad is tapped.
Real-time recording
You can record note information by tapping the pads at any time when
the pattern is being played in recording mode.
1 Press the [SCALE] button.
The button lights up. The light of the 16-pads brightens in red, dims in red or
turns off.
2 Press the [  ] (record) button.
The button lights up in red and recording mode is enabled.
3 Press the [  ] (play) button.
The button lights up in green and a pattern is played in recording mode.
4 Perform by tapping the 16-pads.
The notes will be recorded in the pattern by tapping the pads.
The pad corresponding to the note that is triggered lights up in white.
5 Press the [  ] (record) button again.
The light of the button turns off and the unit exits recording mode.
• Up to 8 notes can be recorded for one step.