Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 27)

Basic Operation
27
En
Recording the performance information into a sequence
in real time (Real-time recording)
The information of the pad performance, the Harmonizer performance,
and the automation can be recorded into a sequence.
1 Press the [  ] (record) button.
The button lights up in red and recording standby mode is enabled.
2 Press the [  ] (play) button.
The button lights up in green. When the sequence starts playing, recordable
mode is enabled.
• The following performance information can be recorded into a sequence;
– Performance information using the 16-pads in Scale mode (page 39)
– Performance information using the 16-pads in Chord mode (page 44)
– Performance information made in combination with the
[HARMONIZER]
buttons (page 71)
– Performance information using the 16-pads in Transpose mode (page 46)
– Performance information of the
[GROOVE BEND] slider (page 93)
– Performance information of the [SPEED CONTROL] buttons (page 99)
– Performance information of the [RHYTHMIC CONTROL] buttons
(page 101)
Restarting a sequence
You can restart a sequence from the first step without stopping the
playback.
1 Hold down the [SHIFT] button and press the [  ] (play) button.
The sequence restarts regardless of whether it is being played, paused, or
stopped.