Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 133)

Changing the settings
133
En
[MIDI OUT] setting
You can change the settings of the following terminals.
The default setting is shown with *.
 OUT1 Mode
Setting value: MIDI OFF, OUT*, OUT+MIDI IN, OUT+USB IN
Set the
[MIDI OUT1] terminal.
• MIDI OFF: MIDI messages are not output.
• OUT: MIDI messages of the unit are output.
• OUT+MIDI IN: MIDI messages of the unit and MIDI messages
received with the [MIDI IN] terminal are merged and
output.
• OUT+USB IN: MIDI messages of the unit and MIDI messages
received with the [USB-B] terminal are merged and
output.
 OUT1 Sync
Setting value: Disable, Send*
Set sending of the timing clock from the
[MIDI OUT1] terminal to
Disable/Send.
 OUT1 Start/Stop
Setting value: Disable, Send*
Set sending of the Start, Stop, and Continue messages from the
[MIDI
OUT1] terminal to Disable/Send.