Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 161)

Connecting to external equipment
161
En
• Select [IN] / [OUT] setting of the [DIN SYNC IN/OUT2] terminal
through [OUT2 Mode] of the [DIN SYNC] setting in the GLOBAL
menu. The factory default setting of the [DIN SYNC IN/OUT2]
terminal is [IN] .
• Use a MIDI cable (5PIN DIN cable) compatible with DIN SYNC for
this connection.
Notes
• For the MIDI cable, use the cable with the 1 PIN and 3 PIN.
• When using a mini-jack conversion cable, use a conversion DIN
SYNC-compatible cable with 1 PIN-RING and 3 PIN-TIP
connections, not a conversion cable for MIDI.
The pin arrangement of the
[DIN SYNC OUT1] terminal and [DIN
SYNC IN/OUT2] terminal is as follows. (It is not compatible with
[MIDI] terminals.)
(1) Start/Stop, (2) GND, (3) Clock, (4) Reset Start, (5) Continue Start
• (For Reference) The pin arrangement of the MIDI terminal is as
follows.
(1) Non-connection, (2) GND, (3) Non-connection, (4) VTX/VRX,
(5) Signal