Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 153)

Connecting to external equipment
153
En
[MIDI THRU/OUT2] terminal (1), [MIDI OUT1] terminal (2)
Connect a MIDI cable to the MIDI IN terminal of the synthesizer, sound
module, etc.
• For the terminal and settings of the related item, see the following.
– “[MIDI OUT] setting” (page 133)
– “[Sync Common] setting” (page 124)
 [MIDI OUT1] terminal or [MIDI THRU/OUT2] terminal set to
[OUT]
• Sequence information recorded in each track of the unit, operating
information on the unit, and BPM information (timing clock) are sent
to external MIDI devices as MIDI messages.
• When pressing the [  ] (play) button on the unit or receiving the Start
signals from external devices connected to the unit, sequence
information recorded in each track of the unit is sent to an external
MIDI device as performance information in accordance with the BPM
or MIDI channel set by this unit.
• You can modify performance information in real time by operating the
phrase arrangement section or step edit section.
• In Scale mode, you can perform with an external MIDI device by
operating the 16-pads. Also, you can control the sequence playback
operation of an external MIDI device connected to the unit by sending
MIDI messages such as the Start, Stop, and Continue messages.
Notes
• Set the MIDI channel of the output destination port of the track.
(Refer to “Selecting an output destination for the current track”
(page 32).)
• Set the MIDI receive channel of the receiving device correctly.