When using the unit as a master device, Connecting to external equipment – Pioneer Toraiz SQUID - Creative Multitrack Sequencer User Manual
Page 156
Connecting to external equipment
156
En
Synchronizing the unit to external MIDI devices or
a PC/Mac
You can perform synchronized playback with external MIDI devices
such as external sequencers, DAW software, etc. by using real-time
MIDI messages such as the timing clock, Start, Stop, and Continue.
When using the unit as a master device
By setting
[Sync Source]
of
[Sync Common]
setting in the GLOBAL
menu to
[Internal]
, you can send the timing clock from the
[MIDI
OUT1]
terminal,
[MIDI THRU/OUT2]
terminal set to
[OUT]
/
[OUT+MIDI IN]
/
[OUT+USB IN]
, or
[USB-B]
terminal in accordance
with the BPM of the unit.
Set
[Master Clock Mode]
of
[Sync Common]
setting in the GLOBAL
menu according to the external MIDI device connected to the unit.
By setting the external MIDI device as a slave device, you can play a
sequence at the same BPM as the one of the unit and control playing
back and stopping of the synchronized playing by operating the unit or
the external MIDI device connected to the
[MIDI IN]
terminal or
[USB-
B]
terminal on the unit.