Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 117)

Changing the settings
117
En
[Pad] setting
The default setting is shown with *.
 Velocity
Setting value: Disable, Enable*
Set VELOCITY to Disable or Enable. When it is set to Disable, the
VELOCITY value is fixed to 127 no matter how hard the 16-pads are
tapped.
 Velocity Curve
Setting value: Soft 3, Soft 2*, Soft 1, Linear, Hard
Sets the strength required to tap the 16-pads and volume
characteristics.
 Velocity Threshold
Setting value: Low 4 to Normal* to High 11
Sets the strength required to achieve minimum velocity when tapping
the 16-pads.
 Velocity Sensitivity
Setting value: Light 11 to Normal* to Heavy 4
Sets the strength required to achieve maximum velocity when tapping
the 16-pads.