Pioneer Toraiz SQUID - Creative Multitrack Sequencer - Manual (Page 61)

Step edit section
61
En
CC (Control Change) mode
You can control the parameters of external equipment from the unit by
assigning up to 5 MIDI controller numbers to each track and
sequencing (step recording) the MIDI control values into each pad
(step).
The parameters used for CC mode
• MIDI CC number 1:
Controller number assigned to the
[PITCH/CC1] knob
The setting range is [#000] to [#127] .
• MIDI CC number 2:
Controller number assigned to the
[GATE/CC2] knob
The setting range is [#000] to [#127] .
• MIDI CC number 3:
Controller number assigned to the
[VELOCITY/CC3] knob
The setting range is [#000] to [#127] .
• MIDI CC number 4:
Controller number assigned to the
[COUNT/CC4] knob
The setting range is [#000] to [#127] .
• MIDI CC number 5:
Controller number assigned to the
[DIVIDE/CC5] knob
The setting range is [#000] to [#127] .
• MIDI CC value:
Control value set to each pad (step)
The setting range is
[0] to [127] and the default value is [0] .