Frymaster Gas Rethermalizers FBRA18 Series - Manual (Page 13)

2-5
WARNING
“Dry-firing” this equipment will cause damage to the cookpot. Always ensure that
the cookpot is filled with water before firing your unit.
4. It is suggested that the burner manifold pressure be checked at this time by the local gas com-
pany or an authorized service agent. Refer to “Check Burner Manifold Pressure” in Chapter 4 of
this manual for the proper procedure.
2.5
Converting to Another Gas Type
This equipment is configured at the factory for either natural gas or LP (Propane) gas.
If you desire to switch from one type of gas to the other, a gas conversion kit must be installed by a
Factory Authorized Service Center technician.
DANGER
Switching to a different type of gas without installing the proper conversion kit may
result in fire or explosion! NEVER attach your fryer to a gas supply for which it is
not configured.