NavCom Sapphire Rev.J - Manual (Page 50)

Sapphire Technical Reference Manual Rev. J
50
1.5 3RDPARTYRTKGLONASS
SF-3050 Sapphire SF-3040
For software version 3.2.10 or later.
This command turns on or off GLONASS RTK corrections usage in RTK.

This feature does not support RTCM 2.3 or RTCM 20/21.
Command: [3RDPARYRTKGLONASS] {ON, OFF}, {Receiver Type}, {Bias}
Parameter Definition
ON,OFF
Keyword: {ON,OFF}
Default: ON
Receiver Type NAV, NOV, TRI, JVD, TOP, LEI, UNKNOWN, MANUAL
Bias Floating Point bias value

The abbreviations given in the Receiver Type Parameter list refer to the following
third party receivers:
NAV: Navcom
NOV: Novatel
TRI: Trimble
JVD: Javad
TOP: Topcon
LEI: Leica
Examples:
[3RDPARTYRTKGLONASS] OFF
Receiver will not use GLONASS RTK corrections from competitive receivers in RTK.
[3RDPARTYRTKGLONASS] ON, NAV
Receiver will use Glonass RTK corrections from a Navcom receiver.
[3RDPARTYRTKGLONASS] ON, NOV
Receiver will use Glonass RTK corrections from a Novatel receiver.
[3RDPARTYRTKGLONASS] ON, MANUAL,-0.0256
Receiver will use Glonass RTK corrections with the specified bias value.