Grass Valley Zodiak v.6.0 Mar 15 2006 - Manual (Page 386)

386 Zodiak — User Manual
Section 5 — System Operation
Figure 274. Modifying an Existing KF Duration
Restoring KF Duration Default to the Keypad
The keypad retains the last duration value entered until it is changed on the
keypad, or until the edit cursor is moved to a new location with a different
duration. You can reset the keypad to the factory default one second dura-
tion at any time
1. Press the KF Dur button so it is lit.
2. Press • , Enter
E-MEM Modify All Operations
The Modify All function can be used to modify selected values of all the
keyframes in an effect that are on levels delegated for editing. Keyframes
on levels not delegated for editing are unaffected.
Modify All operations only affect parameters that have been modified in
the work buffer from the values of the current position of the time cursor.
Typically this position is the current keyframe, but it could be the interpo-
lated state on the path between keyframes. If the cursor is on the path, the
Modify All function will also add a keyframe to the effect at that location.
Modifications to the work buffer are made by pressing a button, turning a
knob, or entering a value with the key pad.
1 2 3 4
0.00 1.15 3.00
1 2 3 4
0.00
1.00
1.00 2.00 3.15
Modify, With 1 Second KF Duration Entered
KF Dur 0.15
Edit Cursor On KF
0618_04_137_r0
New
Keyframe
New
Keyframe Duration 1.00
Effect Duration Increased