Transition – Grass Valley Zodiak v.6.0 Mar 15 2006 User Manual
Page 400
400
Zodiak — User Manual
Section 5 — System Operation
To Transition Between Different Keyer Priorities:
Key priority transitions use a Current priority stack and a Next priority
stack. The transition occurs between the two stacks.
1.
Press the
Key Prior
Transition element button in the Transition subpanel
for the M/E you are using.
Figure 281. Transition Subpanel
2.
If not already set up, turn on the desired keys and arrange them so they
overlap, observing the Program monitor. This will make the changes in
key priority visible. For demonstration purposes, you can use four
preset pattern keys.
3.
Delegate that M/E for preview in the Preview subpanel. This shows
the end result of the transition (the Next priority).
4.
Go to the Keyer-Priority menu by pressing the
Keyer
button in the Home
menu, then touch the
Priority
category selection button.
5.
The current stack in the menu is automatically set to what is currently
being output. You can change the Current priority stacking order if
desired, as described in To Change the Current Keyer Priority:
Key
4
Key
1
2
Key
3
Key
Key
Prior
Dsk
Link
Bkgd
Mix
Wipe
User
Tran
Tran
PVW
Cut
Auto
Tran
Preset
Black
Mix
Key 1
Mix
Key 2
Mix
Key 3
Key 4
Mix
On
On
On
On
Uncal
Effects Send
Transition
0000
Transition
Subpanels (3)
Key Priority
Button
8126_00_23_r0