Administrative parameters, Model, Sysadmin contact – Intermate 100 User Manual
Page 107: Device’s location, Device name
Intermate100 and Intermate101 Print Server Administration Manual
107
[General]: Administrative Parameters
14.2.
Administrative Parameters
14.2.1. Model
The [General] page leads in by displaying the print server’s
model. This text cannot be edited through the usual menu;
OEM partners, please contact our support department.
14.2.2. SysAdmin contact
Maximum 47 ASCII characters within the decimal range 32-
126 (see the table on
). Use this parameter to indicate
a contact person or department for local support and trouble-
shooting for the print server. The contact name will be printed
on E-mail and SNMP notifications, should you implement
them.
14.2.3. Device’s location
Maximum 47 ASCII characters within the decimal range 32-
126 (see the table on
). Use this parameter to specify
the physical location of the local printer or—if you enable NDO
and only want to target network destinations—to specify the
physical location of the stand-alone unit.
The device location will be printed on e-mail and SNMP notifi-
cations, should you implement them.
14.2.4. Device Name
Maximum 47 ASCII characters within the decimal range 32-
126 (see the table on
).
The device name will be printed on e-mail and SNMP notifica-
tions, should you implement them.
Important:
Do not confuse this name with the Host Name (see
).