Intermate 100 - Manual (Page 95)

Intermate100 and Intermate101 Print Server Administration Manual 95
IP Assignments for Initial Contact: Assignment Using RARP
12.5. Assignment Using RARP
1 Power Off the Intermate1xx. If the unit is attached to a printer,
it is best that the printer is powered On.
2 Add the following lines to the [ /etc/ethers ] file or
[ /etc/rarpd.cf ] file: Note that the MAC address is written
with colons : as separators between every two characters.
[ /etc/ethers ] file
<Hardware address> <Host name> (syntax)
00:c0:a2:00:80:1e ima101-a (example)
Or
[ /etc/rarpd.cf ] file
<IP address> <Hardware address> (syntax)
192.168.0.227 00:c0:a2:00:80:1e (example)
c Update your host table and alias name data
bases.
d Start the RARP daemon, if it is not already
running.
rarpd -a
3 Make sure the Intermate1xx is attached to the LAN and
power it on.
4 Connect and Login to the unit with the tool of your choice.
5 Choose [TCP/IP].
a Disable BOOTP and check to be sure that
DHCP is still disabled.
b If it is not possible for Intermate1xx to obtain
the mask from the network, you must type in a
Subnet Mask.
c If automatic routing (RIP) is not used in your
environment, type in the Default Gateway.