Intermate 100 - Manual (Page 114)

Intermate100 and Intermate101 Print Server Administration Manual 114
Configuring Permissions: [License Key]
16.2. [License Key]
Many of our units are delivered with pre-configured license
keys. If this is the case, the license key number will be written
on the label on the back of the unit and you need not use this
configuration page.
Otherwise, you must purchase and enter an appropriate soft-
ware License Key in order to use Host Print options (HPO) in
production mode. If your unit is based on G-22, and you want
to print to network destinations, you will need a license for the
NDO option with or without an HPO option. It is not possible to
do demo-printing for NDO.
A key includes one or more options. The following list is an
example; please consult your point of purchase for the correct
part numbers:
• Network Destination (NDO) (license not required for
products based on G32)
• HPO for 3270/5250 SCS/TNe
• HPO for 3270/5250 SCS/TNe plus NDO (NDO license
not required for products based on G32)
• HPO for AFP/IPDS (including TNe)
• HPO for AFP/IPDS (including TNe) plus NDO (NDO
license not required for products based on G32)
16.2.1. Ordering a key
License Keys are ordered from your point of purchase. If you
bought the Intermate1xx from LCI Intermate A/S directly, you
can order a key by fax or e-mail (
[email protected] ).
You must provide the below minimum information.
1 The Global MAC Address (also known as the IEEE address
or the hardware adapter address).
2 The options you wish to purchase.
3 Contact information including your name and organisation.