Intermate 100 - Manual (Page 55)

Intermate100 and Intermate101 Print Server Administration Manual 55
AIX: LPR (ASCII)
7.2. LPR (ASCII)
The AIX platform integrates the LPD protocol seamlessly into
the normal print spooling system. Setting up an LPD print
queue is therefore easy.
Initialization Screen
On the host, execute the command smit mkqu to get the initial-
ization screen for a new remote print queue. Fill in the fields
described below.
Leave the remaining fields at their default values and press
<Enter> to activate the new settings.
Field Comments
Name of queue to add: A name for the print queue you want to add to the
system. Any name that complies with syntax
requirements will do.
Destination Host: 192.168.0.227
The IP address you have assigned to the print server.
Name of remote queue: Typed in. You can use one of the pre-configured LPR
queues, all of which will direct the output to Logical
Printer 0.
PAR_A ASCII transfer (LF => LF-CR
conversion).
PAR_B Binary transfer, no conversion.
PAR_AF Same as ASCII transfer but with
Form Feed.
PAR_BF Same as binary but with Form Feed.
Or you can define your own name (max 8 characters)
for any one of the eight configurable queues and
associate the desired characteristics as explained in
“LPR Print Queues (LPD Protocol)” (page 163)
Name of device to add: PAR_BFd
Insert a name for the queue device to create for the
print queue. Any name will do. For instance the queue
name with a 'd' appended.