Intermate 100 - Manual (Page 81)

Intermate100 and Intermate101 Print Server Administration Manual 81
The Intermate Management and Configuration Utility (IMCU): Establishing an IMCU Server
11.4. Establishing an IMCU Server
Remember that you must be logged on to the computer with a
Windows NT account with administrative rights if you will be
installing on Windows NT, Windows 2000 or Windows XP.
The IMCU server program is installed by copying the installa-
tion program to a PC running Windows and executing it. This
installs the program files and starts the IMCU service.
The installation program will give you the possibility of installing
a server, an agent, or both. It is a good idea to choose both,
especially if the machine is on the segment where you will be
installing the Intermate1xx, because you will then be sure to
have an agent that can detect the unit.
During server installation, the program asks for a port number
for the server (default is 80). Change the port number if
another service already uses it.
Tip:
You can check to see the ports your PC is listening to
by using the command
netstat -an .
Agent installation: Unless you have a very good reason for
doing so, do not change the default port for the agent (8888).