Using ftp directly, Upgrades of firmware and fonts (ffs files) – Intermate 100 User Manual
Page 206
Intermate100 and Intermate101 Print Server Administration Manual
206
Using FTP Directly: Upgrades of Firmware and Fonts (FFS files)
29. Using FTP Directly
29.1.
Upgrades of Firmware and Fonts (FFS files)
1
Download the firmware file from the Intermate web site.
As our example, let us take the main code for
Intermate100
, G22_2021.zip.
Note:
You will need a decompressing tool based on the
ZIP algorithm (for example WinZip
®
).
2
A single left click on the file name will bring up a File
Download dialog box asking whether you want to open the
file or save it.
When you open it (directly or after having saved it), you can
then extract G22_2021.ffs to an accessible place on your
PC or other host. This could, for example, be
C:\PrintServerUpdates.
3
Start an FTP session to your Intermate100.
ftp 192.168.0.227
4
Give the user name and password for the print server.
5
Change to the library containing the firmware component to
be upgraded. To fit our example, you would do this:
cd Maincode
(Case sensitive on G32- or G34-based units.
)
Important:
Be sure to select the correct library. Storing the wrong
type of file in the wrong place can cause the system to
lock.
On G32, this is not be a problem, because the new file
system will check headers and make sure that nothing
gets placed in the wrong library.
6
Select binary transfer mode.
binary
7
Download the file from your PC to the print server. The
syntax is:
put <source> <target>