Lpr (ascii data, e.g. pcl and postscript), Create a new printer and queue – Intermate 100 User Manual
Page 60
Intermate100 and Intermate101 Print Server Administration Manual
60
OS/2 2.x and OS/2 Warp: LPR (ASCII data, e.g. PCL and Postscript)
8.2.
LPR (ASCII data, e.g. PCL and Postscript)
8.2.1.
Create a new printer and queue
1
Select the OS/2 Template folder.
2
Right-click the Printer icon and drag it on to the desktop,
while holding down the mouse button. Release the mouse
button.
3
In the Create Printer dialog enter the printer name and
select the "Default printer driver" to use with the printer.
Tip:
If you need to install a new printer driver, then click
on the “Install new printer driver..” button. Select an
"Output Port"
. The port has to be one of the LPD
pipes \PIPE\LPD(X).
If there is no free LPD pipe the
number of pipes can be increased in the TCP/IP
Configuration menu
4
The \PIPE\LPD(X) - Settings dialog box will present itself
(see next page). Define “Print Destination” with two
parameters:
a
LPD server = the Intermate100 by IP address
or the Host name.