Intermate 100 - Manual (Page 63)

Intermate100 and Intermate101 Print Server Administration Manual 63
OS/2 2.x and OS/2 Warp: LPR (ASCII data, e.g. PCL and Postscript)
8.2.4. To obtain status from the TCP/IP LPD connected printer
The command LPQ can be used to obtain the status of the
printer.
LPQ -l -s<server> -p<queue>
8.2.5. Troubleshooting
Sending a print job to an LPR print queue when the lprportd
program is not running, results in an error indication. To solve
the problem the print job has to be deleted from the queue, and
the lprportd program has to be started afterwards. If this does
not help, the server will probably have to be rebooted.
Element Replace with
<server> The IP address or the Host name of the printer.
<queue> a queue name as defined in 4b above, page 60