Intermate 100 - Manual (Page 76)

Intermate100 and Intermate101 Print Server Administration Manual 76
Configuration Using a Telnet Client: Menu Items and Settings
10.2. Menu Items and Settings
“Main Menu”
For the most part, each item corresponds to a configuration
page in the HTTP interface. For example:
1. General
2. Network.
...
The list ends with a display of the syntax for two kinds of save
(S and C) and for exiting the Telnet session (Q). There is a tim-
eout function that breaks the connection to the Intermate1xx
after about a minute of inactivity.
As indicated above, each item is numbered.
Select an item by typing the number of the item to the prompt >
and pressing the <Enter> key.
Configuration Menus
When you have chosen an item on the main menu, you will be
presented with a sub-menu with a heading, a numbered list of
parameters and the message “R. Return to main menu”.
Examples of parameters in the sub-menu called “Raw Socket
Menu”:
1. TCP Port 1 <9100>
2. Use Logical Printer 1 <PR0>
3. TCP Port 2 <9100>
4. Use Logical Printer 2 <PR4>
...
As you can see in the example above, each parameter line fin-
ishes by showing the current setting in angled brackets.
Select the parameter you want to change by typing in the num-
ber and pressing the <Enter> key.
You will then be shown the name of the parameter, the current
setting, and information on possible values which are either
chosen by item numbers or typed in. Pressing the <Enter> key
finishes your data entry and returns you to the sub-menu (“pre-
vious menu”).