Intermate 100 - Manual (Page 57)

Intermate100 and Intermate101 Print Server Administration Manual 57
AIX: IPDS with PSF/6000
7.4. IPDS with PSF/6000
Tip: See the chapter Installing a TCP/IP-attached IPDS
printer in the PSF/6000 Print Administration manual
for further information.
7.4.1. Create a new IPDS printer definition
To create a new IPDS printer definition in PSF/6000 execute
the command smit psf_add_prt_tcpip to get the PSF/6000 SMIT
Printer Definition for TCP/IP attached IPDS printers.
Fill in the fields described below.
Press <Enter> to create the new IPDS printer definition.
Field Comments
Printer Name: IMA100
Enter a name for the IPDS printer. This name is also used for the print queue
associated with the printer.
Internet Address: 192.168.0.227
Enter the Host name (preferred) or the IP address you have assigned to the
Intermate100.
If you use the Host name PSF/6000 resolves it into an IP address either through the
hosts file or through a Domain Name Server (DNS).
Port Number: 5001
Always leave this entry at 5001.
No. of Queue
Devices: 4
Initially leave this at the default value. You can tune the option later, according to the
throughput of the printer.
Connect Timeout: 30
Initially leave this at the default value. Refer to the PSF/6000 on-line help for
information about when to increase this value.