Intermate 100 User Manual
Page 16
Intermate100 and Intermate101 Print Server Administration Manual
16
Introduction: Topics in This Manual
tion nodes defined in the Printer MIB (RFC1759) and some
host information nodes of the Host Resources MIB (RFC1518).
NDO is included standard in G32-based products. Users of
G22-based products may purchase a key for activating NDO.
* Logical printer
This is a queue you can use in order to get pre- and post-job
processing carried out, and/or to define string-substitutions
within a job. A logical printer definition always points to a target
printer.
Processing Facilities
The information in the chapter on
explains how all these concepts fit together. Some
of the information may seem abstract until you have tried your
hand at configuring, so you may well return to this chapter
many times.
Configuration Pages for Output and Input
The rest of the chapters within “Configuring Services and Host-
Session” are organized according to sub-groups of configura-
tion pages in the HTTP-based menu.
Each title in [Square Brackets] indicates a configuration page.
“Output Control”
Because each input must point to an output, it is often conve-
nient to have output control configured before configuring
input.
Output has two dimensions—physical and logical. The “Output
Control” sub-group has four pages: two for the physical dimen-
sion and two for the logical.
The Physical Dimension of Output: Target Printer(s)
•
“[Local Printer Parallel Port]” [page 135]
[Local Printer Parallel Port] is the configuration page for
important settings to the local printer. This is the printer
to which the print server is attached.