Juniper Networks MX480 - Manual (Page 93)

CHAPTER 7
Installing the MX480 Router with a
Mechanical Lift
• Tools Required to Install the MX480 Router with a Mechanical Lift on page 69
• Removing Components from the MX480 Router Before Installing It with a Lift on page 69
• Installing the MX480 Router Using a Mechanical Lift on page 74
• Reinstalling Components in the MX480 Router After Installing It with a Lift on page 76
• Installing the MX480 Router Cable Management Bracket on page 81
Tools Required to Install the MX480 Router with a Mechanical Lift
To install the router, you need the following tools:
• Mechanical lift
• Phillips (+) screwdrivers, numbers 1 and 2
• 7/16-in. (11 mm) nut driver
• ESD grounding wrist strap
Related
Documentation
Installing the MX480 Router Using a Mechanical Lift on page 74 •
• Removing Components from the MX480 Router Before Installing It with a Lift on
page 69
• Installing the MX480 Router Using a Mechanical Lift on page 74
• Reinstalling Components in the MX480 Router After Installing It with a Lift on page 76
Removing Components from the MX480 Router Before Installing It with a Lift
To make the router light enough to install with a lift, you must first remove most
components from the chassis. The procedures for removing components from the chassis
are for initial installation only, and assume that you have not connected power cables
69 Copyright © 2013, Juniper Networks, Inc.