JVC HM-DSR100U - Manual (Page 118)

Page 5-26
User and
Installation Guide
C
REATE A
M
ANUAL
E
VENT
T
IMER
To program the recorder's built-in timer manually, do the following:
1. Press the Mode button until the remote is in
the SAT mode.
2. Load a cassette into the cassette loading slot.
ࡗ Make sure the record safety tab is intact.
ࡗ If the tab is missing, cover the hole with
adhesive tape before inserting the cassette.
3. Press the Menu button to open the
Main Menu .
4. Highlight the Timers option and press Select .
The Event Timer Management screen will be
displayed.
5. Press the Up or Down arrow button to
highlight the Create option. Then press
the Select button. The Create a Manual
Event Timer screen will be displayed.
6. Press the arrow buttons to highlight the
desired type of event timer (VCR,
Auto-Tune, or Reminder). Then press
the
Select button.
7. Press the Up or Down arrow button to
highlight the desired timer frequency.
Next press the
Select button and then
press the Right arrow button.
Remote
Menu Options
Buttons
MODE
MENU
7 7 Timers
SELECT
VCR
Auto-Tune
Reminder
Type
SELECT
B
R
O
W
S
E
Weekly
Daily
Mon-Fri
Once
Frequency